Thermo-economic assessment of a thermally balanced SOFC–SCBC–MED tri-generation system with dual-coupling waste heat recovery

Enhancing grid efficiency in Iran's water-stressed power sector: A techno-economic assessment of transformer core replacement under fiscal and water scarcity constraints

Effect of porous layers and array geometry on thermal management in air-cooled lithium-ion battery modules during high-rate cycling

3D multiphysics modeling of sloped electrodes and cooling for improved thermal uniformity in planar SOFCs

CFD analysis of spatially tuned hybrid cooling with porous media and PCM for high-heat-flux electronics

Enhancing Thermo-Electrical Performance of Solid Oxide Fuel Cells through Multi-Channel Cooling System Analysis

Numerical investigation of hybrid thermal management of a lithium-ion battery pack in the presence of PCM and porous medium during charging and discharging processes

Thermal investigation of a lithium-ion cell in presence of PCM within the porous medium considering local thermal nonequilibrium condition

Effects of fin arrangement on the PCM melting in a vertical ‎double-tube heat ‎exchanger considering intermittent ‎boundary conditions

Performance of passive scalar method i n h eat transfer simulation of a two-dimensional droplet focusing on the p arasitic temperatures

Oil directing efect on the temperature of a disc‑type transformer immersed in the nanofuid using the mixture method

Thermal management of lithium-ion battery in the presence of phase change material with nanoparticles considering thermal contact resistance

Modification of the phase-field model to reach a h igh-density ratio and tunable surface tension of two-phase flow u sing the l attice Boltzmann method

A parametric investigation of melting process within a porous medium under local thermal non-equilibrium condition using lattice Boltzmann method

Thermal analysis of disk-type transformer winding immersed in nanofluids using mixture and Eulerian–Lagrangian approach

Investigation of 2D melting process within a porous medium considering local thermal nonequilibrium condition in the presence of sinusoidal boundary condition by lattice Boltzmann method

Investigating the Effect of Heat Transfer Coefficient and the Heat Flux on the Thermal Performance of the PCM in the Heat Sink

Investigation of Mineral Oil-Based Nanofluids Effect on Oil Temperature Reduction and Loading Capacity Increment of Distribution Transformers

LBM Investigation of the Droplet Displacement and Rubbing on a Vertical Wall by a Modified Pseudopotential Model

Towards a Uncertainty Analysis in Thermal Protection using Phase-change Micro/Nano Particles during Hyperthermia

Thermal behavior of a PCM filled heat sink: the contrast between ambient heat convection and heat thermal storage

Using the porous medium to improve the forced convective heat transfer in the channel and its numerical analysis with lattice Boltzmann method

Application of improved pseudo-potential model in examination of droplet dynamic on a rotary cylinder with high-density ratio

Analysis of the stability and thermodynamic consistency conditions in the coexistence curve of liquid and vapor phases in a modified pseudo-potential model

Hydrodynamic behavior of different no-slip condition on the curved boundaries in the lattice Boltzmann method

Analytical and numerical analysis of PCM solidification inside a rectangular finned container with time-dependent boundary condition

بازیابی گرمای اتلافی با ترکیب سیستم تقطیر چنداثره با توربین گازی تغذیه‌شده با گاز دفن‌زباله

سیستم ترکیبی غیرفعال برای خنک‌کاری باتری لیتیوم یونی با ماده تغییر فازدهنده، پره و محیط متخلخل

Numerical investigation of the mutual effects of convection heat transfer coefficient and phase change material in managing maximum temperature changes and temperature difference of thermal well

Correction of Darcy and inertia coefficients in modeling pressure drop within porous media using the Darcy-Furchiheimer relationship with circular and square particles

Numerical study of temperature distribution inside a solid oxide fuel cell in the presence of cooling channels to reduce local temperature gradient

توسعه دوبعدی روش زیوکوویچ به منظور شبیه‌سازی فرآیند ذوب ماده تغییر فاز دهنده به همراه نانوذرات